Sesquiterpene esters from the fruits of Celastrus orbiculatus

Three new beta-dihydroagarofuran sesquiterpene esters, 6 alpha-acetoxy-9 beta-benzoyloxy-1 beta-cinnamoyloxy-8 beta-butanoyloxy-beta-dihydroagarofuran (1), 6 alpha-acetoxy-9 beta-benzoyloxy-1 beta-cinnamoyloxy-8 beta-(2-methylbutanoyloxy)-beta-dihydroagarofuran (2), and 6 alpha-acetoxy-1 beta,8 beta-dibenzoyloxy-9 beta-hydroxy-beta-dihydroagarofuran (6), together with three known compounds (3-5) were isolated from the fruits of Celastrus orbiculatus THUNB. Their structures were elucidated on the basis of spectroscopic methods. Compound 4 showed moderate activity in inhibiting LPS-induced nitric oxide production in murine macrophage RAW264.7 cells with an IC(50) value of 43.7 microM.     

Synthesis and Second‐Order Nonlinearities of Chiral Prolinol‐Substituted Chromophores

A new series of thiophene‐ and furan‐containing chromophores with a chiral prolinol donor and a sulfone acceptor has been synthesized. The UV‐vis absorptions, second‐order nonlinear optical properties, and X‐ray crystal structures are described.     

丙酮一步法合成甲基异丁基酮催化剂研究

用浸渍法制备了丙酮一步法合成甲基异丁基酮负载型催化剂，考察了载体的预处理温度、添加镧助剂对催化剂性能的影响；用BET法测定了催化剂的表面积；采用H2-O2滴定法测定Pd的分散度．结果发现，用经过1．023K焙烧过的Al2O3为载体的催化剂具有较好的催化性能，添加镧助剂后催化剂的分散度、活性有较大的提高．     

酚醛型吸附树脂对咖啡因吸附性能的研究

利用 3种自制吸附树脂JDW 1、JDW 2、JDW 3和DuoliteS 761对咖啡因进行了静态和动态吸附研究 .结果发现 3种自制树脂对咖啡因的吸附性能明显优于DuoliteS 761 ;在吸附咖啡因的初始阶段 ,即达到 3 2 %～5 1 %平衡吸附百分率时 ,吸附速率数据和半经验速率方程很吻合 ,证实吸附咖啡因是粒扩散控制过程 ;酚醛型吸附树脂等温吸附咖啡因的平衡吸附数据符合Langmuir方程 ,相关系数在 0 99以上 ,因此 ,酚醛型吸附树脂吸附咖啡因属单分子层吸附 ;用 1mol LHCl和 40 %的甲醇溶液复合使用 ,效果很好     

两个具有PTP1B抑制活性的4-羟基丁内酯化合物的全合成研究

Two new naturally 4-hydroxylated butenolides were concisely synthesized in excellent enantiomeric purities. An aldol condensation and a Suzuki reaction served successfully as the key steps in the synthesis.     

Cu(bpy)22+—Nafion聚合物膜修饰电极研究

在目前的聚合物膜修饰电极领域中引起人们极大的研究兴趣,这是因为用离子交换方法可将许多电化学或电催化活性的阳离子物种固定于Nafion膜中,构成具有离子导电功能和特定电化学性质的膜合物膜修饰电极。     

铝交联皂石的合成和表征及催化性能

用XRD、化学分析、IR、MASNMR、TPD等手段表征了合成皂石及其铝交联物的结构。结果表明:皂石的交联密度与四面体层电荷和交联条件(Al/土比)有关。在乙醇氨化反应中,交联皂石显示了较好的催化活性和选择性。皂石的交联密度与液相产物分布的关系表明层柱材料对此反应具有择形催化作用。醇氨化反应可能是在吸附态NH_3和气相醇分子间进行的。     

Chromatographic separation and mass spectrometric identification of positional isomers of polyethylene glycol-modified growth hormone-releasing factor (1-29)

A one-step chromatographic method capable of separating all isomers of polyethylene glycol (PEG)-growth hormone-releasing factor (GRF) (1-29) conjugates was developed. The unmodified GRF (1-29) and seven different isomers of PEG-GRF (1-29) conjugates were separated by using a simple reversed-phase HPLC method depending on the differences of hydrophobicity due to the number and site of PEG attachment. The PEGylation sites of all isomers of PEG-GRF (1-29) conjugates were identified by determining the molecular masses of the Lys-C digested fragments with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. This study is a first report for the separation of all PEG-conjugate isomers and would be useful for further studies to find the promising conjugate by evaluating biological activity and stability of each isomer.     

Rheological properties of multisticker associative polyelectrolytes in semidilute aqueous solutions

Multisticker associative polyelectrolytes of acrylamide (≈86 mol %) and sodium 2‐acrylamido‐2‐methylpropanesulfonate (≈12 mol %), hydrophobically modified with N,N‐dihexylacrylamide groups (≈2 mol %), were prepared with a micellar radical polymerization technique. This process led to multiblock polymers in which the length of the hydrophobic blocks could be controlled through variations in the surfactant‐to‐hydrophobe molar ratio, that is, the number of hydrophobes per micelle (N_H). The rheological behavior of aqueous solutions of polymers with the same molecular weight and the same composition but with two different hydrophobic block lengths (N_H = 7 or 3 monomer units per block) was investigated as a function of the polymer concentration with steady‐flow, creep, and oscillatory experiments. The critical concentration at the onset of the viscosity enhancement decreased as the length of the hydrophobic segments in the polymers increased. Also, an increase in the N_H value significantly enhanced the thickening ability of the polymers and affected the structure of the transient network. In the semidilute unentangled regime, the behavior of the polymer with long hydrophobic segments (N_H = 7) was studied in detail. The results were well explained by the sticky Rouse theory of associative polymer dynamics. Finally, the viscosity decreased with an increase in the temperature, mainly because of a lowering of the sample relaxation time. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1640–1655, 2004     

Polysulfonylamine. CLX [1] Kristallstrukturen von Metall‐di(methansulfonyl)amiden. 10 [2] Die dreidimensionalen Koordinationspolymere M[(CH3SO2)2N] mit M = Kalium,Rubidium, Caesium (isotype Strukturen für M = K,Rb)

Polysulfonylamines. CLX. Crystal Structures of Metal Di(methanesulfonyl)amides. 10. The Three‐Dimensional Coordination Polymers M[(CH₃SO₂)₂N], where M is Potassium, Rubidium, Cesium (Isotypic Structures for M = K, Rb) Low‐temperature X‐ray crystal structures are reported for KA (monoclinic, space group P2₁/c, Z′ = 1), RbA (isotypic and isostructural with KA), and CsA (monoclinic, P2₁/n, Z′ = 1), where A^— denotes the anion obtained by deprotonation of the strong nitrogen acid (MeSO₂)₂NH. In KA and RbA, the anion is distorted into a rare C₁ conformation, whereas the standard C₂ conformation is retained in the cesium complex. The structures consist of three‐dimensional coordination networks, in which each cation adopts an irregular (O₆N)‐heptacoordination by forming close contacts to one (O, N)‐chelating, one (O, O)‐chelating and three κ¹O‐bonding ligands; however, the coordination number for Cs⁺ is effectively increased to 8 by a very short Cs···Cs contact distance of 422.5 pm. The crystal packings of the isotypic compounds KA and RbA display lamellar layer substructures that involve six independent ligand‐metal bonds and comprise an internal cation lamella and peripheral regions built up from anion monolayers; the 3D framework is completed by one independent M—O bond cross‐linking the layer substructures. In contrast, CsA features anion monolayers that intercalate planar zigzag chains of cations (Cs···Cs alternatingly 422.5 and 487.5 pm, Cs···Cs···Cs 135.7°), whereby each chain is surrounded and coordinated by four anion stacks and each anion stack connects two cation chains. All structures exhibit close C—H···A interanion contacts consistent with weak hydrogen bonding.